3.At the prompt, type the bootrec command as shown below and then press Enter:.Also, the following procedure should work identically in Windows 10, 8, 7, and Vista. Note: The Command Prompt available from these diagnostic menus is very similar to the one you may be familiar with within Windows.1.Start Advanced Startup Options in Windows 10 or Windows 8.Ģ.Start System Recovery Options if you're using Windows 7 or Windows Vista. Similar problems can exist in Windows XP but since boot configuration information is stored in the boot.ini file, and not the BCD, correcting issues with boot data involves a completely different process. Important: The following instructions apply to Windows 10, Windows 8, Windows 7, and Windows Vista. Just follow the instructions exactly and you'll be fine. Yes, there are several commands to run and lots of output on the screen, but rebuilding the BCD is a very straightforward process. The easiest solution to a BCD issue is to simply rebuild it, which you can do automatically with the bootrec command. If the Boot Configuration Data (BCD) store is missing, becomes corrupted, or isn't properly configured, Windows won't be able to start and you'll see BOOTMGR is Missing or similar error messages early on in the boot process.
0 Comments
Leave a Reply. |